Here are our PCB designs to work with our 3D-printed position tracker array pieces. These boards simplify connecting individual photodetector channels to the Arduino using a box header, avoiding the need to wire up each photodetector individually. Screenshots were made using Fritzing. Each link includes a .zip of Gerber files ready to be sent out for fabrication. To download, right click a link under the corresponding board’s photo and select “save link as…”

For more information, see our how to guide on tracker construction

Photo showing a fabricated tracker PCB being installed

PosTrackDetectorBoard_9 – Nine position board

PosTrackMouse_9 – Smaller spacing for mouse tracker

PosTrackDetectorBoard_12 – Twelve position board

PosTrackMouse_12 – Smaller spacing for mouse tracker